Electric Wood Pellet Machine 230 mm – MKFD230C (Biomass)
Details:
MKFD230C Electric Wood Pellet Machine 230mm for Biomass
The Meelko MKFD230C electric pellet machine is a compact and efficient unit designed specifically for the production of wood and biomass pellets from materials such as sawdust, wood shavings, rice husks, sugarcane bagasse, straw, and other agricultural and forestry residues. Equipped with a 230mm diameter flat die and a powerful electric motor, this pelletizer offers the perfect balance between productive capacity and ease of operation for small and medium producers.
The flat die design used in the MKFD230C enables a highly efficient pelletizing process where previously crushed and conditioned material is forced through the die holes by compression rollers that rotate across its surface. The mechanical pressure and heat generated by friction activate the natural binding agents present in wood lignin, producing dense and cohesive pellets without the need for external chemical additives or binding agents.
Technical Specifications of the MKFD230C
The MKFD230C features a 230mm flat die manufactured from SAE 4140 tempered steel with holes available in diameters of 2.5, 4, 6, and 8 mm depending on the required application. The three-phase electric motor provides the necessary power to maintain constant and uniform production during extended work shifts. The belt and pulley transmission system absorbs load peaks protecting the motor against momentary overloads during operation.
The stainless steel feed hopper allows continuous material loading while the adjustable dosing system ensures a constant flow toward the compression zone. The machine chassis is manufactured from heavy structural steel with industrial paint finish that protects against corrosion and facilitates cleaning after each production day throughout the equipment service life.
Biomass Pelletizing Process
To obtain optimal quality pellets with the MKFD230C, the input material must meet certain preparation parameters. The ideal particle size should be less than 5mm, which is achieved through a prior crushing process using a hammer mill. The material moisture content should be maintained between 12 and 18 percent to allow adequate compression and natural activation of lignin as a binding agent.
During the process, material enters through the upper hopper and falls onto the die surface where compression rollers force it through the extrusion holes. Pellets emerge from the bottom of the die where they are cut to the desired length by adjustable blades. The finished product exits at an elevated temperature and requires a cooling period before storage or bagging to prevent moisture condensation inside the containers.
Biomass Pellet Applications
Pellets produced with the MKFD230C find multiple applications in the energy and agricultural markets. As fuel, wood pellets offer a calorific value exceeding 4200 kilocalories per kilogram with carbon-neutral emissions, constituting an ecological and economical alternative to traditional fossil fuels for residential and industrial heating systems across diverse climate zones.
In the agricultural sector, the pelletizer enables the valorization of crop residues such as wheat straw, sunflower husks, corn stalks, and pruning remains by converting them into biomass pellets that can be marketed as fuel or as bedding material for livestock establishments. This transformation adds significant value to materials that would otherwise represent a disposal cost for agricultural producers.
Advantages of the MKFD230C Pelletizer
The MKFD230C stands out for its ease of operation that allows a single operator to manage the entire production process. Its compact design facilitates installation in reduced spaces and its moderate weight allows transport between different processing locations when necessary. The optimized energy consumption of the electric motor reduces operating costs per ton of pellets produced significantly.
Maintenance of the MKFD230C is straightforward and economical, primarily limited to periodic replacement of the die and compression rollers when they reach their wear limit. Meelko offers all original spare parts with immediate availability including dies with different hole diameters that allow users to adapt their production according to market needs or end customer specifications.
Meelko Quality and Technical Support
Every MKFD230C pelletizer undergoes rigorous quality testing before dispatch, including mechanical alignment verification, no-load and loaded operation tests, and verification of all safety systems. Meelko backs this equipment with a factory warranty and offers specialized technical support to ensure that every customer obtains maximum return on their investment in biomass pelletizing technology and equipment.
Technical Specifications
Applications:
This product is ideal for a wide range of industrial applications, including:
• Material processing
• Industrial production
• Manufacturing operations
• Automation systems
• Construction projects
Warranty and Support
All our products include complete warranty and specialized technical support. Our team is available to help you with any consultation or maintenance need.
General Information
| Product Name | : | Electric Wood Pellet Machine 230 mm – MKFD230C (Biomass) |
| Price | : | $4,591.00 |
| Subcategory | : | Wood pellet mill |
| Category | : | Pellet Mills |
Technical Specifications
| Power | : | 11 kW |
| Capacity | : | 120-200 kg/hr |
| Dimensions | : | 1200*560*1070 mm |
| Weight | : | 320 kg |
| Humidity | : | 17% |
Share this product
Share this product with your network and help others discover quality industrial machinery.
Inquiry about this product
Are you interested in this product? Complete the form and our team will contact you.
Message sent!
Thank you for contacting us. We will respond soon.
